View VYPY1105W_4521118.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Product features
Package Product features 3216 fixed lens type, Water clear epoxy Outer Dimension 3.2 x 1.6 x 1.85mm( L x W x H ) Wide operation temperature range. Storage Temperature : InGaN : -40110 : AlGaInP : -40120 Operating Temperature : -40100 Operation Guarantee Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. Systematization of luminosity groups and color tone groups. Unified to a simple standard. Corresponding to a use requiring high reliability in cars etc... Surface Mount Type and Reverse Mount Type are possible. Shape resin into a lens to make high luminosity possible. Lead-free soldering compatible RoHS compliant Blue Green Yellow Green Yellow Orange Red : : : : : : 470nm (VUB) 530nm (VUG) , 562nm(VYBG) 572nm (VYPY) 590nm (VFY) 605nm (VFA) 615nm (VFV) , 626nm (VFR)
Dominant wavelength
Spatial distribution Die materials Optical efficiency
VUB,VUG20deg. VYBG,VYPY,VFY,VFA,VFV,VFR40 deg. VUB,VUG : InGaN VUB : 10.9lm/W VYBG : 1.3lm/W VFY : 11.8lm/W VFV : 13.2lm/W VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP VUG : 23.6lm/W VYPY : 4.8lm/W VFA : 11.8lm/W VFR : 11.8lm/W
Rank grouping parameter Assembly methods (customer) Soldering methods Taping dimensions ESD
Sorted by luminous intensity and wavelength and taped according to rank. Corresponding to surface mounter. Corresponding to reflow soldering and manual soldering. 2,000pcs(standard) per reel in a 8mm width tape. Reel diameter : 180mm AlGaInP:2kV (HBM) InGaN:1kV (HBM)
Recommended Applications
SW lighting for car indicators, meter panel, car audio and heater control, etc...
2007.8.31
Page 1
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Color Variations and Luminous Intensity
Dominant Wavelength d (nm)
TYP. IF MIN.
(Ta=25)
Part No.
Material
Emitted Color
Lens Color
Luminous Intensity Iv (mcd)
MAX. IF
Luminous Flux v(mlm)
TYP. IF
VUB1105W VUG1105W VYBG1105W VYPY1105W VFY1105W VFA1105W VFV1105W VFR1105W
InGaN InGaN
Blue
470 530
10 10 20 20 20 20 20 20
120 560 39 100 330 330 560 330
470 2,200 150 390 1,200 1,200 820 1,200
10 10 20 20 20 20 20 20
350 780 55 200 450 450 500 450
10 10 20 20 20 20 20 20
Green AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP Red AlGaInP 626
Note : The luminous intensity(Iv) and dominant wavelength (d) above are the setup values of the sorting machine. (Tolerance : IV... 10%, d ... 1nm)
562 Yellow Green Yellow Orange Water Clear 572 590 605 615
2006.3.31
Page 2
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Absolute Maximum Ratings
Absolute Maximum Ratings VUB 84 20 48 VUG 84 20 48 VYBG 81 30 100 1.0 3.33 5 VYPY 81 30 100 1.0 3.33 5 VFY 78 30 100 1.0 3.33 5 VFA 78 30 100 1.0 3.33 5 VFV 78 30 100 1.0 3.33 5
(Ta=25)
Item Power Dissipation Forward Current Pulse Forward Current 1 Derating (Ta=75 or higher) Reverse Voltage Operating Temperature Storage Temperature
Symbol Pd IF IFRM IF IFRM VR Topr Tstg
VFR 78 30 100 1.0 3.33 5
Unit mW mA mA mA/ mA/ V
0.40 2 0.40 2 0.96 2 0.96 2 5 5
-40 +100 -40 +110 -40+120
1 IFRM Measurement condition : Pulse Width 1ms., Duty 1/20. 2 Temperature Condition: Ta=60 or higher.
Thermal Characteristics
Item Junction Temperature (MAX.) Thermal Resistance (TYP.)
(Junction/ ambient)
Symbol
Ratings VUB 110 VUG 110 VYBG 120 VYPY 120 VFY 120 VFA 120 VFV 120 VFR 120
Unit
Tj
R(th j-a)
600
600
700
650
650
650
650
650
/W
Thermal Resistance (TYP.)
(Junction/ Solder Point)
R(th j-s)
400
400
500
450
450
2
450
450
450
/W
Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm .
2009.3.27
Page 3
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Electro-Optical Characteristics VUB,VUG)
Characteristic Ratings VUB TYP. Forward Voltage IF=10mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR =5V IF=10mA IF=10mA IF=10mA IF=10mA IR p d 21/2 MAX. TYP. TYP. TYP. TYP. 3.8 100 465 470 26 20 3.8 100 522 530 35 20 A nm nm nm deg. 3.3 VUG 3.3 V
(Ta=25)
Item Conditions
Symbol
Unit
Note: The dominant wave length (d) above is the setup value of the sorting machine. Tolerance : d...1nm
Electro-Optical CharacteristicsVYBG, VYPY, VFY, VFA, VFV, VFR)
Item Conditions Symbol TYP. Forward Voltage IF=20mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR =5V IF=20mA IF=20mA IF=20mA IF=20mA IR p d 21/2 MAX. TYP. TYP. TYP. TYP. 2.5 100 565 562 15 40 2.5 100 575 572 15 40 2.4 100 592 590 15 40 2.4 100 609 605 15 40 2.4 100 624 615 15 40 Characteristic Rating VYBG 2.1 VYPY 2.1 VFY 1.9 VFA 1.9 VFV 1.9
(Ta=25)
VFR 1.9
Unit
V 2.4 100 635 626 15 40 A nm nm nm deg.
Note: The dominant wave length (d) above is the setup value of the sorting machine. Tolerance : d...1nm
2006.3.31
Page 4
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Luminous Intensity Rank Standard ChartUnit: mcd
Rank B5 B6 B7 B8 B9 BX BY BZ C1 C2 C3 C4 C5 C6 C7 C8 C9 CX CY CZ D1 D2 D3 D4 D5 D6 D7 D8 D9 IVmcd MIN. 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 MAX. 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600
VUB VUG VYBG VYPY VFY VFA VFV
(Ta=25)
VFR
IF=10mA
IF=20mA
B8
C1 C2 C2
C7 C8 CX
C7
C7
C7
CX
D1
D1 D3
D1
D4
Limited width of luminous intensity rank is from Min.4 rank width.
2006.3.31
Page 5
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Color Tone Groups (d)
450nm
(Ta=25) ( unit: nm ) Tolerance: +/-1nm
VUB Type 470nm
VUB Type (IF=10mA) A B MIN. 460.0 464.0 MAX. 464.0 468.0 VUG Type (IF=10mA) A B MIN. 515.0 520.0 MAX. 520.0 525.0
C 468.0 472.0
D 472.0 476.0
500nm
C 525.0 530.0
D 530.0 535.0
VUG Type 530nm
550nm
VYBG Type (IF=20mA) B C MIN. 555.0 558.0 MAX. 558.0 561.0 VYPY Type (IF=20mA) A B MIN. 567.0 570.0 MAX. 570.0 573.0 VFY Type (IF=20mA) C D MIN. 583.0 586.0 MAX. 586.0 589.0 VFA Type (IF=20mA) A B MIN. 597.0 600.0 MAX. 600.0 603.0 VFV Type (IF=20mA) B C MIN. 613.0 616.0 MAX. 616.0 619.0 VFR Type (IF=20mA) A B MIN. 620.0 626.0 MAX. 626.0 632.0
D 561.0 564.0
VYBG Type 562nm VYPY Type 572nm
C 573.0 576.0
E 589.0 592.0
F 592.0 595.0
VFY Type 590nm
600nm
C 603.0 606.0
D 606.0 609.0
VFA Type 605nm VFV Type 615nm VFR Type 626nm
650nm
D 619.0 622.0
C 632.0 638.0
Limited width of color tone rank is from Min.3 to Min.4 rank width. (It changes with product.)
2008.9.12 Page 6
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart VUB,VUG)
Spectral Distribution
Relative Intensity vs. Wavelength
1.2
Condition:IF=10mA Ta=25
Spatial Distribution Example
VUB
1.0
VUG
X-direction
0 30
Condition: Ta=25
Relative Intensity
30
0.8
0.6
60
50
60
0.4
0.2
90
90
0.0 400 450 500 550 600
Wavelength[nm]
Forward Voltage vs. Forward Current
100
Condition: Ta=25
Forward Current vs. Relative Intensity
2.0
Condition: Ta=25
1.5
Forward Current I F (mA)
VUB,VUG
10
Relative Intensity
1.0
VUB,VUG
0.5
1
0.0
2.5
3.0
3.5
4.0
0
5
10
15
20
Forward Voltage : VF(V)
Forward Current : IF (mA)
2005.11.14
Page 7
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart VUB,VUG)
Derating
Ambient Temperature vs. Maximum Forward Current
Repeatition Frequency f 50Hz 60 Maximum Forward Current : I F MAX. (mA)
Ambient Temp. vs. Relative Intensity
Condition:IF=10mA
10.0
50
Duty=5% Duty=10%
40 Duty=20% 30 Duty=50% DC 20
Relative Intensity
VUB
1.0
VUG
10
0 -40 10 60 110
0.1 - 40 - 20 0 20 40 60 80 100
Ambient Temperature : Ta ()
Ambient Temp. : Ta ( )
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
Pulse Width vs. Maximum Tolerable Peak Current
100
Ambient Temp. : Ta=25
10
Maximum Forward Current : IF MAX.(mA)
10
IF Peak MAX./IF DC MAX.
2.4
10kHz
1kHz
100Hz
50Hz
1 1 10 100
1 1 10 100 1000 10000 100000
Duty (%)
Pulse Width : tw (s )
2004.06.25
Page 8
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics ChartVYBG,VYPY)
Spectral Distribution
Relative Intensity vs. wavelength
Condition:IF=20mA Ta=25
Spatial Distribution Example
1.2
X-direction
VYBG
1.0
Condition: Ta=25
VYPY 30
VYBG
0
VYPY 30
Relative Intensity
0.8
0.6
60
50
60
0.4
0.2
90
90
0.0 520 540 560 580 600 620
Wavelength[nm]
Forward Voltage vs. Forward Current
100
Condition: Ta=25
Forward Current vs. Relative Intensity
1.5
Condition: Ta=25
Forward Current I F (mA)
10
VYPY VYPY
VYBG VYBG
Relative Intensity
1.0
0.5
VYPY
VYBG
1 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
0.0 0 5 10 15 20 25 30
Forward Voltage : VF(V)
Forward Current : IF (mA)
2005.11.25
Page 9
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics ChartVYBG,VYPY)
Derating
Ambient Temp. vs. Maximum Forward Current
Repetition Frequencyf 50Hz
120
Ambient Temp. vs. Relative Intensity
Condition:IF=20mA
10.0
Duty=5%
Maximum Forward Current : I F MAX. (mA)
100
80
Duty=10% Duty=20% Duty=50%
Relative Intensity
60
1.0
VYBG
40
DC
20
VYPY
0 -40 -20 0 20 40 60 80 100 120
0.1 -40 -20
Ambient Temp. : Ta ( )
0 20 40 60 Ambient Temp. : Ta ( )
80
100
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
100
Pulse Width vs. Maximum Tolerable Peak Current
Ambient Temp. : Ta=25
10
Maximum Forward Current : IF MAX.(mA)
IF Peak MAX./IF DC MAX.
10
3.3
10kHz
1kHz
100Hz
50Hz
1 1 10 100
1 1 10 100 1000 10000 100000
Duty (%)
Pulse Width : tw (s )
2005.9.28
Page 10
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics ChartVFY,VFA,VFV,VFR)
Spectral Distribution
Relative Intensity vs. Wavelength
Condition:IF=20mA Ta=25
Spatial Distribution Example
X-direction
0 Relative Intensity 30
Condition: Ta=25
30
60
50
60
90
90
Wavelength[nm]
Forward Voltage vs. Forward Current
Condition: Ta=25
Forward Current vs. Relative Intensity
Condition: Ta=25
100
1.5
Forward Current I F (mA)
Relative Intensity
1.0
10
VFV, VFR VFY,VFA
0.5
VFY,VFA,VFV,VFR
1 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4
0.0 0 5 10 15 20 25 30
Forward Voltage : VF(V)
Forward Current : IF (mA)
2006.10.30
Page 11
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics ChartVFY,VFA,VFV,VFR)
Derating
Ambient Temp. vs. Maximum Forward Current
Repetition Frequencyf 50Hz
120
Ambient Temp. vs. Relative Intensity
10.0
Duty=5%
Condition:IF=20mA
Maximum Forward Current : I F MAX. (mA)
100
80
Duty=10%
60
Duty=20% Duty=50% DC
Relative Intensity
1.0
VFA VFV,VFR
40
20
VFY
0 -40 -20 0 20 40 60 80 100 120
0.1 -40 -20
Ambient Temp. : Ta ( )
0 20 40 60 Ambient Temp. : Ta ( )
80
100
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
100
Pulse Width vs. Maximum Tolerable Peak Current
Ambient Temp. : Ta=25
10
Maximum Forward Current : IF MAX.(mA)
IF Peak MAX./IF DC MAX.
10
3.3
10kHz
1kHz
100Hz
50Hz
1 1 10 100
1 1 10 100 1000 10000 100000
Duty (%)
Pulse Width : tw (s )
2006.3.31
Page 12
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Package Dimensions
(Unit: mm) Weight: (7.81)mg
Recommended Soldering Pattern
(Unit: mm)
Surface Mount
Reverse Mount (Unit: mm)
Taping Specification
Part No. : V 1105W -TR
(Surface Mount)
Part No. : V
1105W -RR (Reverse Mount)
Quantity: 2,000pcs/ reel(standard)
Quantity: 2,000pcs/ reel(standard)
2005.9.28
Page 13
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum)
Manual Soldering Conditions
Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.)
2007.8.31
Page 14
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Reliability Testing Result
Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock Thermal Shock Operating High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life Resistance to Reflow Soldering Electric Static Discharge (ESD) Vibration, Variable Frequency
1
Testing Conditions Ta = 25, IF = Maxium Rated Current Ta = Maximum Rated Operating Temperature, IF = Derating Value Ta = -40, IF = Maxium Rated Current Ta = 60, 90%, IF = Maxium Rated Current Ta = 60, 90% Ta = -40 Maximum Rated Storage Temperature (each 15min.) Ta = -40(off) 85 (IF = Derating Value on), (each 15min.) Ta = Maximum Rated Storage Temperature Ta = Minimum Rated Storage Temperature Ta = -30(2h) 80, 95%(2h), 8h/cycle, IF = Derating Value, 5min on-off Moisture Soak : 30, 70%, 72h Preheat : 150 180(120s Max.) Soldering Temp. : 260(5s) C = 100pF, R2 = 1.5K, 2,000V 98.1m/s (10G), 100 2KHz, 20min, XYZ each direction
2
Duration
Failure
EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(103) EIAJ ED4701/100(105) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/200(203) EIAJ ED4701/300(301) EIAJ ED4701/300(304) EIAJ ED4701/400(403)
1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 h 0/20 1,000 cycles 0/20 1,000 cycles 0/20 1,000 h 0/20 1,000 h 0/20 30 cycles 0/20 Twice 0/20 once each polarity 0/10 2 h 0/10
1 Reference test
Failure Criteria
Items
Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance
Symbols
Iv VF IR -
Conditions
IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V -
Failure criteria
Testing Min. Value Spec. Min. Value x 0.5 Testing Max. Value Spec. Max. Value x 1.2 Testing Max. Value Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking
2007.8.31
Page 15
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com
2007.8.31
Page 16

▲Up To Search▲

Price & Availability of VYPY1105W

	To Download VYPY1105W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .